The HyperReef LED for Saltwater Aquariums features Cool White, Warm White, Photo Red, Green, Royal Blue, Blue, Violet and UV LEDs for full spectrum output with wavelengths that exceeds the visible light spectrum. Creating the most vivid spectrum and multiple spectral combinations optimized to suit your aquarium’s exact lighting needs. Suitable for SPS corals in the center-top of tank.
NICREW 150W Aquarium LED Reef Light
The NICREW HyperReef LED is perfect for SPS tanks. It has 72 LEDs that range from 405 nm (UV) to 660 nm (Deep Red). Emitting a full spectrum making it a perfect light for fast growth, and coloration of corals. NICREW HyperReef LED could meet the lighting needs of corals and enable you to give your coral what they need without having to become an expert in lighting and programming.
- Optimal output for maximum color & growth
- The maximum spread – 30″ x 30″
- Control of the white and blue channels independently
- Narrow-angle lens focuses the light for better penetration
- An integrated fan to prolong light lifespan
- Can be fully controlled by 3rd-party controllers
- UL Listed low voltage power supply
Flawless Touch Control
The light is able to be set to 5%, 20%, 40%, 60%, 80%, 100% intensities for each channel to allow you to adjust the light intensity and spectrum for your tank.
NOTE: This item is not compatible with NICREW Single-channel timer or Dual-channel timer.
Easily suspend the light above your aquarium with the hanging kit (Included).
Quite Active Cooling
The heat sink has been designed to maximize surface area and allow for superior heat dispersion.
|HyperReef 30||HyperReef 50||HyperReef 100||HyperReef 150|
|Number of LED||18||24||48||72|
|Intensity Adjustment of Each Channel||Yes||Yes||Yes||Yes|
|Peak PAR@24″||58||128||250||Approx. 305 PAR@28″|
|Recommended Spread||18 x 18 in||18 x 18 in||18 x 18 in||24 x 24 in|
|Maximum Spread||20 x 20 in||24 x 24 in||24 x 24 in||30 x 30 in|
|0-10V Port||No (Compatible with NICREW Dual-channel Timer)||✓||✓||✓|
Frequently Asked Questions
Q1: Can I use timer to control HyperReef LEDs?
Yes, HyperReef 50, 100 and 150 can be connected to an external 0-10V controller. You can use Kessil Spectral Controller X to control the lights if you have one. Please notice, we don’t recommend you to use Kessil A-Series Spectral Controller currently (because the controller cannot turn off HyperReef white channel completely when we tested, minimum brightness is 5%). For HyperReef 30, you can buy our dual channel timer instead. Please do not buy our single channel timer, single channel timer pro and dual channel timer to connect with HyperReef 50, 100 and 150. They are not compatible.
Q2: Can I control HyperReef through Neptune Apex?
Yes, HyperReef 50, 100 and 150 can be controlled by Apex. But you need to connect a 3.5mm to RJ45 cable (not included) directly into your Apex Controller. You can buy Kessil 3.5mm to Neptune Apex Control cable or make your own cable instead. Below is the Apex DIY Cable Wiring diagram. Please notice, HyperReef 30 doesn’t have 0-10V control ports. You can buy our dual channel timer instead.
Full color spectrum (popular blue spectrum, red, green and Violet+UV) can promote optimal coral growth and enhance dramatic coloration, while creating a gentle shimmer throughout the aquarium
With a maximum spread of 30″ x 30″, the light has an average PAR of 305µMol at a depth of 28 inches, perfect for medium to large reef tanks
Smart fans for LEDs temperature control ensuring optimal LEDs’ working conditions
With touch control, white and blue channels can be operated together or independently, allowing you to adjust the light intensity and spectrum for your tank
Easily mount your light on your rimmed or rimless tank with the tank mount included, you can also choose to suspend the light above your aquarium with the hanging kit (Included)
There are no reviews yet.