Hygger Titanium Heater with Temp Controller
Specification:
- Model: HG-969
- Voltage: 110V-120V, 60HZ
- 500 watt, for 60~120 Gallon fish tank, heater rod length: 7.9 inches
- 800 watt, for 120~180 Gallon fish tank, heater rod length: 9.6 inches
Always unplug the heater for 15mins to cooling down before water change or cleaning fish tank. Otherwise, it would melt the case.
provides a fast and safe way to heat up and maintain proper temperature for your fish
500w/800w
- IP68 100% Waterproof, Fully Submersible
- Shatterproof, corrosion resistant titanium heating element
- Auto shut off when over-heats, resets when it cools down
- ABS plastic protective case prevents fish from punching and scald
- Adjustable heat setting from 70°F to 94°F
- Easy to read water temperature
- Ideal for used in 60-180 gal freshwater and saltwater aquariums
Saving Energy
The heater heats up your aquarium at full speed once it plug in. You can see MAX on the screen. When it reaches the proper temp, it stops.
Once the water temp drops 1 degree or so, the heater heats up again in low energy to keep the proper temp. You can ECO on the screen.
In this way, the heater saves energy greatly.
How to set temperature:
- Place heater rod underwater and fix it on the wall
- Plug in power and you can see LED digital number flashing 3 times and shows current water temperature, red indicator lights onn
- Press set button to the desired temperature which will blinks 3 seconds and starts to heat the water
- Once it reach desired temperature, indicator light switch to green
Attention:
1. Make sure that the heater doesn’t touch sand or gravel on the tank bottom.
2. To avoid the device overheating and insure its better performance, it’s better to put it close to the tank filter.
3. Don’t plug in the aquarium heater if it’s not completely drown into the water.
4. Unplug the heater first before water change
TROUBLESHOOTING
The screen keeps blackout
- Reason: the heater is interfered by electronic components
- Solution: contact seller to replace it
Er code
- Reason: heater rod come out of water or temp probe defective
- Solution: unplug it and take it out for 1 hour, then restart. If not working, contact seller.
Suction holder not fit
- Solution: contact seller to get a new holder
 |  |  |  |  | |
|---|---|---|---|---|---|
| Quartz Heater Controller | Turtle Heater | Titanium Heater | Titanium Heater | Quartz Heater Controller | |
| Power | 300W 500W | 50W, 100W | 500W, 800W | 50W, 100W, 200W, 500W | 200W |
| Controller | ✓ | ✓ | ✓ | ✓ | |
| Fit for aquarium | 30-120 gallon | 1-13 gallon | 60-180 gallon | 5-120 gallon | 15-30 gallon |
| Control Range | 61 to 90°F | 63 to 94°F | 68 to 93°F | 32 to 104°F | 61 to 90°F |
| Heating Material | Quartz | Quartz Glass | Titanium | Titanium | Quartz |
{ RUNNING DRY & OVER-HEAT PROTECTION } This fully submersible fish tank heater maintains proper temperature for your fish in a safety way, auto shut off when over-heats, resets when it cools down. The heater will shut off when removed from the water, and resume functioning upon return
{EASY TO READ LCD DISPLAY} Build-in external temp controller, easy to read LED digital number shows real time water temperature and set temperature. Indicator light let you know when the heater is on. It will be red when heating and green when the proper temperature has been reached
{SHATTERPROOF CORROSION RESISTANT} Corrosion resistant, shatterproof titanium tube construct heats fast, nealy unbreakable for both saltwater and freshwater aquariums. ABS plastic protective sleeve prevents fish from being scald
{EASY TO USE} Easy to set temperature without getting hands wet. Just keep pushing the button. It will cycle through all the set temperatures. Temperature can be precisely adjusted from 68 to 93°F (20°C ~ 34°C), electronic thermostat accurate to +/- 2 degrees Fahrenheit differences
{FOR 120-180 GAL} 800 watt aquarium heater, voltage 110-120 Volts, heater rod 9.6 inches long, suitable for tank capacity 120-180 gallon freshwater and saltwater aquariums
Reviews
There are no reviews yet.