1.The fish tank light has IP68 waterproof, but the adapter is not waterproof, please do not put the adapter and the wire into the water.
2.The light board may become hot after long time use. This is a normal phenomenon, please avoid touching the light board directly with your hands. Turn off the power and wait for 10-15 minutes before touching it.
3.The operation of the aquarium light is a bit complicated, you may encounter difficulties during use, please read the manual carefully to set up, if you still encounter problems, we can solve the problem for you as soon as possible.
HiTauing 2021 Upgraded LED Aquarium Light
24 HOUR AUTO CYCLE
In default auto cycle, you can use daylight and moonlight option to create your own custom 24 hours light cycle, altering auto on /off time, adjusting light color and intensity for moonlight option. Preset lighting auto turns on at 6:30 AM and auto turn off at 11:30 PM. The light can be set to turn on and off at the designated time which allows your fish get some rest at night.
COLOR GRADIENT LOOP
At the daylight and moonlight modes, it can be programmed into color gradient loop mode. In the daylight time period mode, the full-spectrum lighting is automatically turned on. In moonlight time period mode, color gradient cycle begins. The middle arrays of RGB LEDs slow turns from red into purple, blue, cyan, green, yellow to orange, continuous circulation of color gradient.
In ‘DIY mode’, you can use eight time slots to create your own custom 24-hour light cycle, adjusting ‘on/off’ and light intensity for each slot. DIY mode is full spectrum only. You cannot choose colors, you can only alter the brightness at certain time periods.
After finish the DIY mode setting, please remember to reset local time to activate DIY setting.
- Daylight mode: automatically simulate sunrise, noon and sunset, the light color is full spectrum.
- Moonlight mode: Automatically simulate the night, the light color is other 6 colored lights.
- DIY mode: Customize 8 different time periods, and the brightness of each period can be adjusted.
- 2 modes available: the default auto cycle and the DIY cycle
- Waterproof level: IP68 Water-Resistant Rating
Daylight and Moonlight Mode Cycle:
Full spectrum white light in the day and blue in the night.
1.Full spectrum period: 06:30-18:30, blue light period: 18:30-23:30.
2.Night colors can be changed, there are 6 kinds in total: dark blue, green, purple, cyan, yellow, red.
3.The brightness of the light changes in accordance with the curve designed.
4.You can change the full spectrum white light period start and end time; night start and night time.
5.NOTE: No matter when the set time starts, the brightness of the light will gradually become brighter.
Restore the Factory Settings:
The settings are wrong or the settings are confusing, you can restore the factory settings and start over. Long press the up and down keys at the same time for a few seconds, until “SOP” appears, then unplug the power, wait at least 3 seconds later, then plug again, it can restore the factory settings. After restoring factory settings, all the previous setting modes are cleared back to the default setting, and you can reset the desired mode.
10 Adjustable Brightness:
There are 10 kinds of brightness can be adjusted: 10%-100%, to simulate the effect of sunrise to sunset, and the brightness of the light can be set in different 8 Time Stages, which can realistically simulate natural light. Not only can it brighten the fish, it can also be applied to the growth of aquatic plants and promote photosynthesis.
Excellent High Efficient Heat Dissipation:
Fully encased 1.8 mm thickness aluminum shell where the heat sink was fixed onto helps to transfer the heat of the LED bulbs, so as to reduce light decay and extend its service life. The light housing is hot which indicates its excellent cooling performance. This system has adjustable mounting legs which can be used in aquariums widths of 12-18 inches, 18-24 inches, 24-30 inches, 30-36 inches, 36-42 inches, and 48-54 inches.
IP68 Waterproof Rating:
IP68 water resistant rating. Fully sealed and waterproof, high light transmittance, waterproof and easy to clean. No need to worry about splashes, or other accidental drops of water. Note that power connector is not waterproof, be careful not drops in water. Low voltage dc adapter makes our our light applicable for 100-240 volts, safe to use, low energy consumption, saving electric bill.
|AP-02 Aquarium Heater||AP-03 Aquarium Heater||PJ-201 Aquarium Heater||Electric Aquarium Gravel Cleaner||Silent Aquarium Air Pump|
|Suitable For||26-66 gal fish tank||60-120 gal fish tank||60-120 gal fish tank||/||1-15 gal fish tank|
|Apply to||Fish tank heating||Fish tank heating||Fish tank heating||Fish tank cleaning||Fish tank increases oxygen|
🌞【High-tech Aquarium Lights Controller】The recommended fish tank size for this DC 15V/24W LED plant aquarium light is 18-24 inches, Input voltage is AC100 -240V / 60HZ. With a high-tech LCD digital display controller, you can easily adjust the color and brightness of the light through settings, and you can also set different light color changes in different time periods.
🌞【Full Spectrum LED Aquarium Light】The color of this fish tank light is all-optical, dark blue, green, purple, light blue, yellow, red, dark red (7 color changes mode), And there are 10 kinds of light brightness can be adjusted, the light is soft, the color rendering index is close to natural light, protecting eyes and fish, you can adjust the brightness according to the surrounding environment to achieve the best viewing effect.
🌞【Simulate Sunrise and Sunset and DIY Mode】This fish tank light has a built-in timer, which can simulate the time of sunrise and sunset by setting the time and brightness of the light, and the working mode of day and night, so that the plants can be fully photosynthesized and can also bring you a best viewing experience. DIY mode can set 8 time periods, 10 kinds of adjustable brightness, you can adjust the lighting time and brightness in 8 different time periods.
🌞【Adjustable Bracket and Thickened FishTank Light Board】This fish tank light comes with 2 metal mounting brackets, which are both freely extendable. You can easily to install this led fish tank light on most aquarium tanks, with cover or no, with rims or rimless. The thickness of the aluminum alloy fish tank light board is 1.8mm, 0.05mm thicker than others lights, which has better heat dissipation and heat insulation performance.
🌞【IP68 Waterproof Lamp Beads and Light Memory Function】 This aquarium lights for fish tank uses high-density connections and has IP68 waterproof performance, which can prevent water from entering the circuit and burning the fish tank lights. Easy to clean and wipe, even if it falls into the water, don’t worry. Power off memory function, after the light resumes work, the time is also real time, no need to reseting.