The Large Cat Door (White)
Outer size: 9.25″(W) x 9.84″(H) x 2.17″(D)
Inner size: 7.08″(W) x 7.48″(H) x 2.17″(D)
It’s suitable for cat lighter than 17.64 lb and waist circumference shorter than 23.62″. Please make sure your cat’s waist first, thanks.
1). Make sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.
2). The magnet at the bottom of the door frame is for aligning the flap after swings, it doesn’t work as a lock, thanks.
The Tabs&Switches Function Instruction
1. Draw outline on the paper board
Draw the cat door frame on a paper board and cut it down.
You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape.
2. Draw outline on the door
Use a pencil draw around the edge of the cut paper on the door you want to be fixed to.
Generally, average installation height is around 10-15 cm from the floor.
3. Drill 4 corners for holes
Drill 4 corners for thorough holes first with an electric drill.
4. Cut out a tunnel hole
Cut out the tunnel hole with an electric saw starting at holes drilled.
5. Put the cat door in the door
After the tunnel hole is cut out, it’s better to wrap around it with a layer of wood skin. And if your hole is cutting a little big, it’s quite neccessary.
6. Cut down tunnel depth if necessary
If the cat door is too thick for your door, use a scissors or cutting machine to cut down some part of tunnel along the line A or B. The cutting scale is about 2-4CM.
7. Mount to the door
Mount the cat door with double-side tape to the door. 8 screws have been provided for your use, tighten them with a screwdriver on both sides.
8 screws for 4 holes on both sides, screw them all in 2 sides as illustration shown above, please. These 8 screws are designed to work together, they are not short.
Place screw caps over the screw holes, press them on. The installation is completely done.
|View Product||View Product||View Product||View Product||View Product||View Product|
|Outer Size||7.56″ × 8.5” × 2.17”||9” × 10.6” × 2.17”||10” × 11.6” × 2.17”||9.8” × 11” × 2.15”||9.8″ x 11″ x 0.94″||9.4″ x 11.4″ x 0.4″|
|Inner Size||6.3” × 6.2‘’ × 2.17”||7.1” × 7.7” × 2.17”||7.7” × 8.9” × 2.17”||7.9″ x 8.7″ × 2.15”||7.9” × 8.7‘’ × 0.94‘’||7.5″ x 9.4″ x 0.4″|
☞SIZE — The large cat door, inner size 2.17″(D) x 7.08″(W) x 7.48″(H), it’s suitable for cat lighter than 17.64 lb and waist circumference shorter than 23.62″. And its outer size is 2.17″(D) x 9.25″(W) x 9.84″(H)
☞SAFE&THOUGHTFUL — The transparent cat flap let cat see through the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing. 4-way door control meets cat’s daily need. The magnet between the 2 switches is for aligning the flap after swings. Inner frame edge get polished, so as not to hurt cat
☞4-WAY SWITCH MODE — The cat flap door could be adjusted by the Red and Green switches with tabs to 4 modes: out, in, both in and out, and fully locked. The tabs are the key factor for the 4-way switch
☞EASY TO INSTALL — 8 screws and its caps included in the set makes you easily install in windows, doors, cupboards, panels and walls, etc. Screw in the 8 screws for 4 holes from both sides, if the cat door is too thick for the door you want to be fixed to, you could cut the tunnel depth using a scissors, saw or cutting machine
☞EXCELLENT QUALITY — Made of ABS material, weather-resistant, the surface is smooth and durable. Please peel off the protective film of the cat flap panel after you install the cat door