Installion instructions
| | | |
|---|---|---|---|
1. Draw outline on the paper boardDraw the cat door frame on a paper board and cut it down. Note: You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape. | 2. Draw outline on the doorUse a pencil draw around the edge of the cut paper on the door you want to be fixed to. Note: Generally, average installation height is around 10-15 cm from the floor. | 3. Drill 4 corners for holesDrill 4 corners for thorough holes first with an electric drill | 4. Cut out a tunnel holeCut out the tunnel hole with an electric saw starting at holes drilled. |
| | | |
|---|---|---|---|
5. Put the cat door in the doorAfter the tunnel hole is cut out, it’s better to wrap around it with a layer of wood skin. And if your hole is cutting a little big, it’s quite neccessary. | 6. Cut down tunnel depth if necessaryIf the cat door is too thick for your door, use a scissors or cutting machine to cut down some part of tunnel along the line A or B. The cutting scale is about 2-4CM. | 7. Mount to the doorMount the cat door with double-side tape to the door. 8 screws have been provided for your use, tighten them with a screwdriver on both sides. Note: 8 screws for 4 holes on both sides, screw them all in 2 sides as illustration shown above, please. These 8 screws are designed to work together, they are not short. | 8. DonePlace screw caps over the screw holes, press them on. The installation is completely done. |
☞CONVENIENT LOCK — The knob-style switch is 4 way rotary, you can easily rotate it to 4 modes with the arrow and icons to control your cat’s access options: in only, out only, in and out freely, totally locked.
☞IMPROVED WEATHER-PROOF BRUSH STRIP — It provides a fixed groove with snap tabs for weather-proof brush strip, firmly fix the brush strip. Even if the brush strip comes off, easy to put it back into the fixed groove. This greatly help the brush strip reduce noise, stop rain drop, wind or pest like mosquito to the most.
☞THOUGHTFUL SCREWS — It comes with 2 packs of 8 screws each, one is packed with short screws, the other long. Please screw in with them from both sides to prevent crack out of incaution, don’t just from one side. You could make 8 screws for the 4 screw holes with long + long, long + short, or short + short group according to the depth of door / wall being installed.
☞EASY TO INSTALL — Step by step installation instruction in the instruction manual included in sales box and installation presentation video for you reference, take care of notice and prepare necessary tools, easy to install as your need. The tunnel depth could be cut down according to your installation need.
☞APPLICABLE FOR — Inner size 2.17″ / 5.5CM(D) x 7.1″ / 18CM(W) x 7.7″ / 19.5CM(H), it’s suitable for cat with waist circumference shorter than 23.62″ / 60CM. And the outer size is 2.17″ / 5.5CM(D) x 9″ / 23CM(W) x 10.6″ / 27CM(H). It fits to being installed to interior doors, exterior doors, walls, windows, cupboards, glass, etc.
Reviews
There are no reviews yet.